Retro-fit halogen surface mounted pool and spa light.
Extra low voltage: available in 12 volt, 100watt, 24 volt, 150 watt or 32 volt, 150 watt.
Diameter: 238mm, Projects 59mm into pool or spa.
Easy replacement of most brands of existing lights.
Includes Retro mounting bracket.
Includes Sealing Kit.
The Retro light was designed to enable simple replacement light for your existing pool light.
Spa Electrics have been manufacturing 12volt 100watt Halogen underwater lights for over 30 years.
These lights are available in two different styles to suit your needs: The flush mounted light and the surface mounted light.
Our globes are produced to the highest quality standards to ensure a long burn life and powerful water penetration, providing a wide spread
of light and a beam length of up to 8 metres. The average lamp life is approx 1200 hours.
To maximize the lamp life of your Halogen globe your light should be turned on regularly, lack of use can potentially damage the globe and shorten its life.
It is essential that you do not turn a Halogen light on out of water. The globe burns white hot and you will cause damage to your light's seal and over a
very short period of time cause the light to melt or deform, when this happens it enables water to enter the light cavity, destroying your Light.
Only one Light is to be used with one Spa Electrics LV-100 12 Volt transformer. If you are planning to use 2 or more lights a more cost effective way
of installing your lights is to order an LV-200 transformer, this will allow you to connect two Lights to one transformer.
Unlike the Ceramic Light Engine it is not the lamp which emits the colour it is actually the lens. So you will also need to
choose the lens colour that you would like your pool water colour to be.
GK6 - Halogen replacement light, suitable to replace most major brands on the market.
|•||No cable joining required.|
|•||Incoming cable can be disconnected and re-connected at the back of the light.|
|•||Suitable for Concrete and Fibreglass pools.|
|•||Slotted rim allows water circulation behind the light eliminating stagnant water and aiding in cooling.|
|•||Choice of rim colours including: white, taupe, black, grey or ivory.|
|•||Interchangeable coloured lenses available in blue, green, clear, red or magenta.|
|•||Simple installation and one screw mounting for ease of service.|
|•||Supplied with sealing kit.|
|•||Unique electrical connection so that power cable does not intrude into light cavity - eliminates possible source of water entry.|
|•||IPX8 waterproof rating.|
|•||Designed and manufactured in Australia.|